Skip to main content

How to maximize Ipad Battery life


So you got yourself a shiny new Apple device, but you’re so addicted that the battery is running out way too soon—what you need is a couple of tips to keep your battery running for as long as possible, and we’ve got them here.
Many of these tips are going to be common sense, and won’t be a surprise to the more geeky readers, but now you’ll have an article you can send to your less geek friends and relatives when they ask you how to improve their battery life. And we’ve got a battery life article for Android too.

Keep Your iDevice Out of the Sun

Whatever you do, don’t leave your iPhone or iPod sitting in a hot car—heat kills batteries faster than any other factor, and your device that used to keep a charge for hours will eventually barely hold a charge, and you’ll have to pay Apple to get it replaced. The same thing holds true for any really hot environment: try and store your device in a cool place.

Reduce the Screen Brightness

If you keep the screen at maximum brightness all the time, you’re wasting a lot of battery life—and the screens these days are so bright anyway that you don’t really need to, especially at night. Head into Settings -> Brightness & Wallpaper to adjust the default level of brightness, which you can probably keep as low as 30% most of the time.
image

Make Sure the Screen Locks Quickly

Even if you’ve adjusted the screen brightness, there’s still no substitute for having it turn off quickly when you’re not using it. Head into General -> Auto-Lock to set the screen lock to happen as quickly as your device will let you. This makes a big difference if you are always picking up your phone and putting it back into your pocket without turning the display off.
image

Use Airplane Mode When You Don’t Need Internet (iPad/iPhone)

If you’re busy spending the next 8 hours playing Angry Birds, there might not be a good reason to have internet access, so you can consider using Airplane Mode, which turns off both Wi-Fi and the regular wireless radio. Of course, this will prevent phone calls if you’re on an iPhone—but if you’re busy with Angry Birds you probably don’t want the interruption anyway.
image
The more important reason to use Airplane Mode is when you’re mobile in an area with a really spotty connection—because the iPhone or iPad will try to stay connected at all times, it’s going to be constantly searching for a connection, which can drain your battery. Head into Settings and flip the Airplane Mode switch right up at the top of the screen.

Use Wi-Fi Instead of 3G if Possible

According to Apple, the iPad will get 10 hours of battery life under regular use with Wi-Fi enabled, but will only get 9 hours using 3G—the iPhone gets 6 for 3G and 10 for Wi-Fi. Of course, if you’re heavily using the Wi-Fi, you’ll still be draining the battery—the point is under similar workloads, Wi-Fi is better than 3G for battery life.
You can enable Wi-Fi under Settings -> Wi-Fi, and then pick the network you’d like to connect to.
image

Reduce or Eliminate Mail & Calendar Checking

If you’ve got a bunch of email, calendar, or contact accounts configured, and they are all being checked and downloading email on a regular basis, you’ll be draining the battery an awful lot faster than you need to.
Head into Settings -> Mail, Contacts, Calendars -> Fetch New Data and change the setting to the least frequent check possible. If you don’t use it often, you can just turn Push off entirely and then manually check when you need to.
image

Reduce or Eliminate Push Notifications

Do you really need notifications from Twitter or whatever other apps you’re running? You can turn these off one-by-one, or turn off Push entirely by heading into Settings -> Notifications, and save a bit of extra battery life since your device won’t be pulling in data for those applications anymore.
image

Reduce or Eliminate System Sounds

This one is probably a little silly, but if you really don’t care for the system sounds you can save a small amount of battery life by removing the sounds. A very, very small amount, most likely. Head into Settings -> General -> Sounds to change them.
image

Disable Location Services

If you don’t really need the location services, you can disable them to save some battery life. Head into Settings -> General and flip the Location Services setting to off.
image

Disable Bluetooth If You Don’t Need It

If you don’t use a Bluetooth headset or keyboard, you should keep the Bluetooth radio disabled to save some extra battery life. Head into Settings -> General -> Bluetooth to flip it on or off.
image

Disable Vibrate Feature in Games

If you’ve got a game that uses the vibrate feature, you can turn that off to save some battery life. This mostly matters if the game heavily uses it, and you’ll need to change the setting for the game. As a side note, and it should go without saying, if you’re running really intensive video games, they will kill your battery very quickly.

Charge and Discharge Your Battery Regularly

Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge it quickly.

Comments

Popular posts from this blog

How to turn off Ringbacks on Rogers

Rogers just update you to the latest iPhone value pack, or figure out some other way to stick you with their ringbacks service, and you’re desperate to find out how to turn it off? They don’t want to make it easy — they want you to pay money for more Ringbacks — but after over an hour of waiting on 3 different customer service and tech support reps, I got the answer. Here it is: From your Rogers iPhone, text 555 with the word OFF. You’ll get an autoreponder with a link to http://rogers.com/ringbacksoff Tap the link. You need to be on Rogers’ network (i.e. not Wi-Fi) to access this page! Scroll down to the bottom and turn OFF both Ringbacks and Voice Greetings. (Yes, Ringbacks are so annoying they require and additionally annoying Voice Greeting to beg the people who call you not to hang up while they’re annoyed by the Ringback.) Rogers tried to get me to give Ringbacks a chance, saying if I loved the Beatles and my friends new I loved the Beatles, I could entertain them w...

How to Reload Operating System on Nuked or Bricked BlackBerry

Good Afternoon Class! I’ve been a bit slack in my  BlackBerry 101  lectures as of late – I blame the  Smartphone Round Robin , all the  Contests  we’ve been running on the site and the busy Holiday Season. My apologies! This will be the last 101 lecture of the year… but we’ll be back in 2008 bigger and better than ever. Today’s lecture isn’t really a “newbie” topic, but it’s one that I wanted to cover because in the past three weeks I’ve gone through it half a dozen times and that is  Reloading the Operating System on a BlackBerry that’s totally “Nuked” . I’m not sure if nuked is the technically appropriate word for it (I also use one that starts with an F and ends in an ED and has a CK in the middle), but it is how I refer to a BlackBerry that is stuck in a permanent reboot cycle and is completely, completely unusable. With a Nuked Berry, essentially the device turns on (red LED comes on for a few seconds), then you see the white screen with the hou...

Best Ipad and Iphone Photography Apps

Longtime Exposure Calculator Price: Free/ Available for iPhone, iPod touch, iPad Long-exposure photography fanatics will know that an ND filter can be essential when it comes to extending exposure time for those all-important open shutter shots. Longtime Exposure Calculator by HPR-Solutions is a free iPhone,iPad and iPod touch app that enables you to dial in a projected shutter speed to one column and then 'add' an ND filter as graded in both f/stops and filter names (eg 3 stop or ND8) in the other column. The app then calculates the adjusted exposure. While it is, in part, possible to TTL meter with an ND filter attached to the front of a camera's lens, the results won't always be accurate, and there's a point where things get so dark that it's not possible - especially with in-vogue super-dense filters. Having an off-camera calculation method such as this makes it quick and easy to figure out exposures without so much as needing to put those brain...